Table of Contents
Advertisement
ARM-EVAC® 250 & 200 SYSTEMS
MAINTENANCE
FUSES
The fuse is located in a sliding tray on the back side of the Arm-Evac 250/200, just below the
power receptacle. Each Arm-Evac is supplied with one replacement fuse, also located in the sliding
tray. Replacement fuses are available for the Arm-Evac 250/200 systems in packages of 5 fuses.
230 VAC systems (part numbers 8889-0200 and 8889-0250) come standard with a 3.15 amp fuse,
part number 8884-9966-P5. 110 VAC systems (part numbers 8889-0205 and 8889-0255) come
standard with an 8 amp fuse, part number 8884-996145.
MOTOR
Fume Extractor Motors are maintenance-free, brushless single inlet fans which do not require
routine maintenance. It is important that fume extractor filters are changed on a regular basis to
protect the motor impellers from pollutants.
ACCESSORIES
Monthly cleaning of the Arm-Evac 250/200 extraction accessories is recommended. Arm-Evac
accessories should be cleaned with a non-aggressive cleaning solvent or detergent only. Make sure
the Arm-Evac accessories are completly dry before reuse.
Orion Industry – 16 chemin de la Guy – 91160 Ballainvilliers – France - Tel +33 1 69 34 53 11
Page 17 sur 18
E mailto:info@orion-industry.com- W
http://www.orion-industry.com/
Advertisement
Table of Contents
