Specifications - Avtech AV-112A-PS Instructions Manual

Model:
Output amplitude:
Maximum peak current:
Maximum average current:
Output polarity:
Load impedance:
Output resistance 1 :
Bandwidth (f ):
-3dB
Rise time (20%-80%, for
maximum output):
Average output power:
(maximum)
Voltage gain :
2
Gain polarity:
Input range 2 :
Input impedance:
Dual channel option:
DC offset option 3 :
Connectors:
Dimensions:
Power requirement:
1) "Output resistance" is the internal resistance in series with output. Non-zero output impedances (R
slightly when operating into low load impedances. That is, V
resistance.
2) These parameters can easily be adapted to meet special requirements. Contact Avtech (info@avtechpulse.com) with your special application.
3) To specify the DC offset option, add the suffix -OS to the model number. The sum of the amplitude and the offset must remain within the rated
output amplitude range – i.e., this option does not change the minimum or maximum obtainable output voltage.
4) Add the suffix -INV to specify the switchable gain polarity featu

SPECIFICATIONS

Standard: Non-inverting (+)
Optional 4 : Switchable between Non-inverting (+) and Inverting (-) modes
100 mm x 430 mm x 375 mm (3.9" x 17" x 14.8")
100-240 Volts, 50-60 Hz
= V × R
OUT SET LOAD
AV-112A-PS
0 to ±200 Volts
40 mA
40 mA
Bipolar
≥ 5 kΩ
≈ 50 Ω
300 kHz
1 us
8 W
×1 to ×100
0 to ± 2 Volts
1 kΩ
Not available.
0 to ±200 Volts
In, Out: BNC
) will reduce the maximum output amplitude
OUT
/ (R + R ), where V is the set amplitude and R
LOAD OUT SET
6
is the load
LOAD