Nintendo Wii Operation Manual page 22

Installing Batteries (cont.)
1. Pull the Wii Remote Jacket
off the base of the Wii
Remote and pull the wrist
strap out of the hole in the
bottom of the jacket.
2. Pull the jacket up the remote far
enough to expose the entire
battery door and remove the door.
3. Insert the batteries into the battery
chamber. Be sure to insert the
minus (-) end first when inserting
new batteries, and remove the
plus (+) end first when replacing
the batteries.
4. Replace the battery cover, thread
the wrist strap through the hole in
the bottom of the jacket and pull
the jacket back over the bottom of
the remote.
5. If you remove the jacket from the
remote, replace it by inserting the
top of the remote into the large
hole on the front of the jacket.
Be sure to push it all the way into
the inside of the jacket.
b. Thread the wrist strap throught
hole in the bottom of the jacket,
as shown in step 4, above.
7. Insert the connector cover into the
External Extension Connector on
the bottom of the remote.
NOTE: Battery life can be checked by pressing the Home Button. See pages 62-63,
Wii Operations Manual - Channels and Settings, for more information.
20