Nintendo Wii Operation Manual page 35

Hide thumbs Also See for Wii:
Table of Contents

Advertisement

Available languages

Available languages

No picture on N screen
• Make sure you have completed all steps, in the order that they appear, on the Quick
Setup sheet included with your system.
• Make sure that all components of your setup are plugged into power outlets and that
all components are turned ON.
• Make sure that cable connections are correctly installed and that all plugs are securely
plugged into the appropriate connectors.
• Make sure that the INPUT settings are correct for your particular setup. (Review page 18
on Input Select information.)
No sound is heard or sound quality is poor
• Make sure the Nvolume is not turned off or muted.
• Make sure that all audio connections are correctly installed and that all plugs are
securely plugged into the appropriate connectors.
• Make sure the Wii AV Cable is plugged into the "input" connectors on the
TV or VCR, not the "output" connectors.
• Make sure that the INPUTsettings are correct for your particular setup. (Review
page 18 on Input Select information.)
• The sound in some games doesn't begin until the game begins.
• If you have a monoTV or VCR and have left one of the audio cables unconnected
you may not get all game sounds. Use a "V' Adapter to get both left and right
sound channels.
• If your TV or VCR has both mono and stereo options, make sure it is set to match your
setup.
• Check the instruction booklet for the game you are playing to see if there are
volume controls or mono/stereo options that can be set from within the game.
The console Power LED does not come on, or goes off
during game play
• Make sure the AC Adapter is plugged into both the wall outlet and the back of the
console.
• If the light is still off, disconnect the AC Adapter plug from the wall outlet, wait 2
minutes and plug it back into the outlet. Turn the console power ON.
System unable to read disc or game disc will not
operate in console
NOTE: Game Discs will not start automatically. You must start disc games from the Disc
Channel on the Channel Menu screen.
• Make sure the disc is inserted correctly. The label side of the disc must face to the right
if the Wii console is set up vertically, or must face up if the Wii console is setup
horizontally.
• Check to be sure that the Game Disc is clean and in good condition. If dirty, wipe with
a soft cloth, from the center to the outside. Do not wipe with a circual motion.
• Eject the Game Disc, and turn the power OFF and then ON. Reinsertthe disc and try
playing the game again.
• Check that the Game Disc will work on your version of the Wii.This system will only
work with Game Discs made for use in the USA, Canada, Mexico and Latin America.
Game Disc slot does not light blue or lights briefly.
This is the normal operation of the Game Disc slot. The slot only lights temporarily
when the system is turned on by a) inserting a Game Disc, b) using the Power
Button on the Wii Remote or c) using the Power Button on the Wii console.
The Game Disc slot will also light temporarily if you receive a message via
WiiConnect24 (this feature must be turned on to receive messages, see page 59 in the
Wii Operations Manual Channels and Settings for more information).
33
0

Advertisement

Table of Contents
loading

Table of Contents