Nintendo Wii Operation Manual page 17

Mounting the Sensor Bar Below the Screen
1. Remove the protective film from the foam pads
on the bottom of the Sensor Bar.
• The front of the Sensor Bar should be
aligned with the front of the surface
the TV is sitting on.
2. For additional stability, you can add adhesive
backed foam tape from the supplied sheet.
3. Mount the Sensor Bar to the front edge of the
surface the TV is sitting on. Do not place the
Sensor Bar below the surface that the TV is
sitting on; for example, on shelves below
the TV.
I
• The center of the Sensor Bar should be
aligned with the center of the TV.
15
I
a
E
N
T
N