Advertisement
Electrical Installation
Dedicated Electrical Circuit with GFCI Protected Outlet
A dedicated GFCI protected electrical circuit is REQUIRED for all Memphis Wood Fire Grills and
controller systems. This circuit should be installed by a Certified Electrician. Although the
Memphis Grill only uses about 5 amps of current during startup, any other equipment (refrigerator,
pool pump, fountains, etc.) with a high current draw, consistently or intermittently, from the same
electrical circuit can cause potential issues and/ or interruptions with the performance of the grill.
On/Off Switch Recommendation
For Built-in models, we recommend that an on/off switch be installed in a circuit that can
be easily disconnected from power when not in operation. This will prevent the buildup of
interference that could affect the controller's operation.
6
Advertisement
