Table of Contents
Advertisement
GROOVE CUTTING
1. Remove the battery pack from the
product.
2. Remove the blade guard from the riving
knife. Loosen the throat plate lock knob.
Remove the throat plate.
3. Unlock the riving knife lock lever. Move
the riving knife to the lowest position.
Lock the riving knife lock lever.
4. Install the throat plate. Tighten the throat
plate lock knob.
5. Install the battery pack into the battery
port.
6. Switch
on
the
product.
workpiece to the blade.
WARNING! Use the push stick between
the blade and rip fence. Do not use at the
open end.
WARNING! Do not perform cutting
operation feedhand.
NOTE: Adjust the cutting depth using the
Height and bevel adjustment wheel.
1
1
2
3
1
Feed
the
4
2
5
1
2
3
1
2
2
3
2
3
15
Operation
Advertisement
Table of Contents
