Table of Contents
Advertisement
ADJUSTING THE RIP FENCE PARALLEL TO
THE BLADE
1. Remove the battery pack from the
product.
2. Remove the blade guard from the riving
knife. Loosen the throat plate lock knob.
Remove the throat plate.
3. Unlock the riving knife lock lever. Remove
the riving knife.
4. Using the height and bevel adjustment
wheel, adjust the blade to the highest
position.
5. Unlock the rip fence lock lever. Loosen
the locking bolts.
6. Using a ruler, measure the distance
between the rip fence and front edge and
rear edge of the blade respectively. Adjust
the rip fence until both measurements are
the same.
7. Tighten the locking bolts.
8. Install the riving knife. Lock the riving
knife lock lever.
9. Install the throat plate. Tighten the throat
plate lock knob.
24
Maintenance
1
1
2
1
3
1
4
5
1
2
3
2
2
2
2
Advertisement
Table of Contents
