Ryobi RTBS18X Manual page 22

ADJUSTING THE BLADE PARALLEL TO THE
MITRE GAUGE GROOVE
1. Remove the battery pack from the
product.
2. Remove the blade guard from the riving
knife. Loosen the throat plate lock knob.
Remove the throat plate.
3. Unlock the riving knife lock lever. Remove
the riving knife.
4. Using the height and bevel adjustment
wheel, adjust the blade to the highest
position.
5. Loosen the locking bolts.
6. Using a ruler, measure the distance
between the mitre gauge groove and
front edge and rear edge of the blade
respectively. Turn the adjusting bolt left
or right until both measurements are the
same.
7. Tighten the locking bolts.
8. Install the riving knife. Lock the riving
knife lock lever.
9. Install the throat plate. Tighten the throat
plate lock knob.
22
Maintenance
1
1
2
1
3
1
4
5
2
3
2
2
2