• Cordless or electric drill in death, serious personal injury, severe product and/or • Appropriate drive bits property damage, including voiding of the Lippert limited • Zip ties warranty. • 2 Cotter pins •...
Solera Awning Polycord ® Fabric Replacement Installation and Owner’s Manual (For Aftermarket Applications) Removal 1. Remove the drip cap (if equipped) from the end which the fabric will be removed. FAILURE TO SUPPORT THE ROLL TUBE, FABRIC 2. Fully extend the awning.
Solera Awning Polycord ® Fabric Replacement Installation and Owner’s Manual (For Aftermarket Applications) Installation 1. Unroll the replacement fabric over the old fabric so roll tube that the cord is parallel with the roll tube and to prevent valance scratching the fabric.
Solera Awning Polycord ® Fabric Replacement Installation and Owner’s Manual (For Aftermarket Applications) Maintenance 9. Secure the fabric in the awning rail no more than 1” inside the edge of the fabric on both ends using a #6 x ”...
Page 8
All manual information is subject to change without notice. Revised editions will be available for free download at lippert. Manual information is considered factual until made obsolete by a revised version. Please recycle all obsolete materials and contact Lippert Components with concerns or questions.
Need help?
Do you have a question about the Solera and is the answer not in the manual?
Questions and answers