Dell OptiPlex Small Form Factor 7010 Owner's Manual page 97

Hide thumbs Also See for OptiPlex Small Form Factor 7010:
Table of Contents

Advertisement

Steps
1. Remove the screw (6-32) that secures the front I/O bracket to the chassis.
2. Rotate and remove the front I/O-bracket from the chassis
3. Disconnect all the cables that are connected to the system board.
4. Remove the seven (#6-32) screws that secure the system board to the chassis.
Rimozione e installazione di unità sostituibili sul campo (FRU)
97

Advertisement

Table of Contents
loading

This manual is also suitable for:

D17sSmall form factor 7010

Table of Contents