L'installazione dei seguenti componenti attiva BitLocker:
● Unità disco rigido o unità SSD
● Scheda di sistema
Strumenti consigliati
Le procedure in questo documento potrebbero richiedere i seguenti strumenti:
● Phillips screwdriver #0
● Phillips screwdriver #1
● Torx #5 (T5) screwdriver
● Plastic scribe
Screw list
N.B.:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
N.B.:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
N.B.:
Screw color may vary with the configuration ordered.
Tabella 24. Screw list
Component
M.2 2230/M.2 2280 Solid-state
drive
Hard-drive and optical-drive
supporting bracket
Optical-drive supporting bracket M2x2
2.5-inch Hard-drive
3.5-inch Hard-drive
Serial/VGA module
DP/HDMI/Type-C module
SD-card reader
WLAN card
Processor-fan and heat-sink
assembly
Screw type
M2x3.5
#6-32
M3x3.5
#6-32
M2x5
M3x3
M3x5
M2x3
Captive
Quantity
1
1
1
4
4
2
2
1
1
4
Interventi sui componenti del computer
Screw image
33
Need help?
Do you have a question about the OptiPlex Small Form Factor 7010 and is the answer not in the manual?
Questions and answers