Table of Contents
Advertisement
General
Safety information
1.3 Safety information
Applications conforming
with specifications
Documentation
Disposal
6
CAUTION!
Damages to property is likely if these warnings are not heeded.
Supplementary information and useful tips.
The Touch Panels are constructed and produced for:
n
VIPA CPUs 01x, 11x, 21x, 31x, 51x and S7-300/400 from Siemens
n
communication and process control
n
industrial applications
n
operation within the environmental conditions specified in the technical data
n
installation into a cubicle
DANGER!
This device is not certified for applications in
–
in explosive environments (EX-zone)
The manual must be available to all personnel in the
n
project design department
n
installation department
n
commissioning
operation
n
CAUTION!
The following conditions must be met before using or commis-
sioning the components described in this manual:
–
Hardware modifications to the process control system should only be
carried out when the system has been disconnected from power!
–
Installation and hardware modifications only by properly trained per-
sonnel.
–
The national rules and regulations of the respective country must be
satisfied (installation, safety, EMC ...)
National rules and regulations apply to the disposal of the unit!
HB160 | TP | 62G-FID0 | en | 20-20
VIPA HMI
Advertisement
Table of Contents
