Table of Contents
Advertisement
VIPA HMI
Properties
HB160 | TP | 62K-JIDR | en | 20-20
You can change the settings of the RFID reader via 'My Device è Flashdisk
è VIPARFiDReader è VIPARFiDReader'
1.
Stop the application with [Stop] to change the settings. Now you can change the fol-
lowing settings:
n
RFiD Standard
–
ISO15693 (default)
–
ISO14443 A
–
ISO14443 B
–
ISO14443 Mifare
n
Send Keys (default)
After reading, the ID is displayed in an editor or text field as plain text. A waiting
period between sending the single characters from 0 to 1000 ms can be set.
Default: 0 (no waiting time)
When the box 'with Enter' (default) is activated, after the ID a line break is dis-
played.
n
Shared Memory (VIPARFiD)
After reading, the ID is written into the internal memory.
n
Com Port Settings
Via COM3 (default) the RFID reader is connected internally to the Touch Panel.
If you want to connect an external reader, here you can set the port which is
being used.
2.
After changing the properties, click [Start] to start the application again und then
click [Hide] to minimize the window.
ð Now the RFID symbol appears in the task bar
ties window again.
Deployment Touch Panel
Deployment RFID reader
. Click this to open the proper-
25
Advertisement
Table of Contents
