YASKAWA VIPA TP610C RFID Manual page 22

Deployment Touch Panel
Commissioning > Startup-Manager
Settings
Info/Update (firmware)
Autostart
22
n In [Settings] under Change Settings you can set a password for the Startup-Manager.
The password will be requested when interrupting the start countdown or before
closing the Startup-Managers by "Exit". By default, no password is defined.
n In Control Panel [Open...] the system settings like brightness of the display can be
preset or the display can be re-calibrated. Here the MPI/DP slave interface may also
be configured. Further you get here the Touch Panel information: product number,
serial number and licenses.
n To execute the firmware update press the button [Info/Update]. After clicking on [Info/
Update] the current image is displayed under "Panel Information" with panel name,
creation date and version number.
n With [Create Screenshot] you can make a screen shot of the panel information and
select a destination for its storage.
n With [Search Image] a list of all the firmware images is shown, which are available on
the panel and connected storage media. These images will be listed with create data
and version number. Choose your new image.
If the selected image is not correct for your panel, an error massage will appear. If the
image is correct for your panel, in the following message the current installed image ver-
sion and the new selected image version will be listed.
1. Click on [Update Image] to execute the update. This can take a few seconds.
ð After successful update the Touch Panel restarts automatically.
After the restart the calibration window opens.
2. Re-calibrate the panel as described. After calibration tap anywhere on the screen.
ð The calibration window closes.
To permanently retain the settings, you have to store them under'Start
è Programs è KuK_Tools è KuK Tools' [Store].
With [Autostart] you define which runtime and which project will be started automatically
together with the panel startup.
HB160 | TP | 62K-JIDR | en | 20-20
VIPA HMI