All specifications are nominal and may change as design improve- ments occur. Greenlee Textron Inc. shall not be liable for damages resulting from misapplication or misuse of its products. Loctite is a registered trademark of Loctite Corporation.
Hazards which, if not avoided, COULD result in severe injury or death. Hazards or unsafe practices which, if not avoided, MAY result in injury or property damage. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
Page 4
Pinch points: Failure to observe these precautions may result in injury or property damage. Keep hands away from moving parts. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
Copper (600-Volt Building Wire) ..........170 mm (350 MCM) ....240 mm (500 MCM) Aluminum (600-Volt Building Wire) ........... 240 mm (500 MCM) ....400 mm (750 MCM) Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
Maintain a firm grip on both handles when using this tool. • Inspect before use. Replace any worn or damaged parts. Failure to observe these precautions may result in injury or property damage. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
(14, 22). Open and close the cutter to spread the oil. Disassemble, clean, and lubricate the tool if it does not operate smoothly. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
9. Remove two housing screws (11). Lift housing from tool. 10. Remove two screws (11) to disassemble operating lever assembly and remove pawl (15), pawl spring (12) and pawl shaft (19). Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
LUBRICATION JAW DRIVE POINTS - MECHANISM USE MOLYKOTE ® OPERATING LEVER 6,25 JAW HOLDING MECHANISM 9,26 *Note: Tighten to 19.2 - 21.4 Nm (170-190 in-lb) Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
Page 10
The long leg of the spring goes against the bottom handle adapter (28) and the short leg goes under the pawl (see Figure 3). Figure 3 Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
Page 11
17. Bend tab (5) on nut retainer (24) to secure nut (6). 18. Apply adhesive Loctite 416 Super Bonder sparingly to assemble two bumpers (10) (see Figure 1). Figure 5 Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
All manuals and user guides at all-guides.com 763 and 764M4 Ratchet Cable Cutter Illustration Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
Handle assembly - one handle and hardware for 764M4 (includes keys 11, 18, 28-32) ............1 50059521 Handle assembly - one handle and hardware for 763 (includes keys 11, 18, 28-32) ............1 Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
Page 14
815-397-7070 Fax: 815-397-1865 Canada 800-435-0786 Fax: 800-524-2853 International +1-815-397-7070 Fax: +1-815-397-9247 4455 Boeing Drive • Rockford, IL 61109-2988 • USA • 815-397-7070 An ISO 9001 Company Greenlee Textron Inc. is a subsidiary of Textron Inc. • www.greenlee.com Printed in USA...
Need help?
Do you have a question about the Greenlee 763 and is the answer not in the manual?
Questions and answers