Yuwell BreathCare PAP Wireless Connection Manual

BreathCare PAP
Positive Airway Pressure Units
Wireless Connection Operation Guide
The guide is designed to provide guidance on how to connect the device to a wireless network and check the
wireless network signal and the therapy data.
1. Connect your device to the network
• There are two ways for you to connect your device to the network.
► 1.1 Method 1: Configure network via Bluetooth
(1) Download the Breathcare+ APP
• Download and install the latest version of Breathcare+ to your mobile phone.
• For IOS: App Store®
• For Android: Google Play®
(2) Login
A. Create new account:
• Click Create an account on the login page of the Breathcare+ APP；
• Fill in the relevant information and set the account password, then check
the box to agree to the terms of use and click Send activation email；
• Login your email account and check the email sent by Yuwell. Click Activate
your account now, then click Application For Registration. If it shows
Register successfully, then the activation is done；
• After successful activation, click Sure to return to the Breathcare+ APP login
page.
B. Log in to an existing account
• Enter your account and password, click Log in to enter the Home page.
(3) Set your device
• Power on your device, set Upload Data and Bluetooth to ON.
(4) Connect your phone and device via Bluetooth
• Turn on the Bluetooth on your mobile phone, enter Breathcare+ APP ;
• Add your device ;
Add the first device：Click +Add device on the home page to add your device；
Add more device：Click My tab, then click My device, and finally click +Add on the upper right corner to
add more devices.
Language English
Upload Data ON
Bluetooth ON
Filter Reminder 4Week
Restore Defaults >>Enter