Storage; Short-Term Storage; Long-Term Storage; Start-Of-Season Preparation - Gravely Pro-Turn Z52 Operator's Manual

STORAGE

SHORT-TERM STORAGE

IMPORTANT: NEVER wash unit with high-
pressure water or store outdoors.
1. Allow unit to cool and clean with mild
soap and water.
2. Tighten all hardware to correct
specifications.
3. Inspect unit for visible signs of wear or
damage. Repair as needed.
4. Prepare fuel system for storage.
NOTICE: Gravely recommends using a
quality fuel stabilizer in all fuel. Gasoline left
in the fuel system without a stabilizer, even
for short periods of time, deteriorates and
leaves gummy deposits in the system that
may damage the carburetor and fuel hoses,
filter and tank. For the best effectiveness, add
stabilizer to all fuel containers whenever
purchasing fuel. Add the stabilizer to the
container before adding fuel.
a. Add fuel stabilizer (see Service Parts
on page 20) or equivalent according
to manufacturer's instructions to the
fuel tank and any fuel containers with
remaining fuel.
b. Run engine outdoors for at least
5 minutes to allow stabilizer to reach
the carburetor.
5. Turn key to off position and remove from
ignition.
6. Store unit in a cool, dry, protected area.
DO NOT store unit outdoors.

LONG-TERM STORAGE

1. Perform short-term storage procedures.
2. Lubricate as directed in Maintenance
Schedule on page 19.
3. Touch-up all scratched painted surfaces.
4. Remove and charge battery as directed
in Battery Service on page 23. Store
battery in a cool, dry, protected area.
5. Store unit in a cool, dry, protected area.
DO NOT store unit outdoors.
START-OF-SEASON
PREPARATION
1. Before adding fuel for the first time after
long-term storage, add fresh, stabilizer-
treated fuel to fuel tank and any fuel
containers with remaining fuel.
2. Charge and install the battery.

ACCESSORIES

See your Gravely dealer for a complete list of
compatible accessories and attachments for
your unit.
Description
Mulch Kit – 52"
Mulch Kit – 60"
Hitch Kit
Headlight Kit
Light Operator Seat Spring Kit 79107000
Bagger Kits*
Base Kit
• Kit for 52" Decks
• Kit for 60" Decks
*Bagger kits are ordered in two parts.
Complete baggers require Base Kit
89100800 plus the kit matching the deck
size of the unit.
EN - 38
Part No.
79105800
79105900
79202300
79106800
89100800
79106500
79106600