Reverse Clutch Brake Plates - Gravely Pro-Turn Z52 Operator's Manual

b. From left transaxle sheave.
c. From clutch sheave.
Install Transaxle Drive Belt
See Figure 42.
1. Install transaxle drive belt to drive system
in the following order:
a. Around clutch sheave.
b. Around left transaxle sheave.
c. Around right transaxle sheave.
2. Align belt with idler pulley.
3. Reinstall idler spring hook onto anchor
bolt. Make sure belt has tension and is
aligned in all pulleys.
2
1. Spring
2. Idler Pulley
Figure 42
IMPORTANT: Make sure belt has tension and
is aligned in all pulleys. See Figure 43.
1
3
1
1. Engine Sheave
2. Idler Pulley
3. Left Transaxle
4. Right Transaxle
4. Reinstall clutch stop bracket and secure
with original hardware. See Figure 44.
5. Reinstall PTO belt. See Install PTO Belt
on page 29.
REVERSE CLUTCH BRAKE
PLATES
See Figure 45.
1. Remove hardware securing brake plates
to clutch bracket. Retain for reinstallation.
2. Reverse the brake plates and secure to
clutch bracket using original hardware.
EN - 31
2
Figure 43
Figure 44
4