1886
Turn the light kit counterclockwise until the light kit screws
are firmly situated in the narrow end of the keyhole slots.
Install the third screw, found in the
place and then tighten all three screws.
Install a bulb into each of the sockets. When
necessary, replace with bulbs of the same wattage.
9
Ceiling Bracket
Downrod
Installing the Light Kit
bag
hardware bag, into
Repeat x2
Lift the globe assembly and attach it to the upper switch
housing using the three thumbscrews, found in the hardware
bag
. Tighten all three screws securely by hand.
Hanging Fan
Wiring
1 of 6
Switch Housing
Assembly Screws
Globe
Carefully lower the globe into the globe
retainer until it rests in place.
Canopy
WARNING
FAN FALL HAZARD
Make sure screws are tight to secure the
light fixture.
bag
WARNING
GLASS FALL HAZARD
To prevent SERIOUS INJURY or DEATH, make
sure that glass is properly secured.
Blades
Light
3 of 3
Thumb
Screws
ON
Glass/Bulbs