Related Manuals for Hunter Oceana
Summary of Contents for Hunter Oceana
- Page 1 Oceana Installation Manual Model: 59615 Noble Bronze 59616 Matte Silver Fan weight ±2 lbs: 21.2 lbs (9.6 kg) ©2019 Hunter Fan Co. PG3801 r120219...
- Page 2 - All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. c.2 - Use only Hunter replacement parts. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 3 Here is what comes in your box: 1886 Hunter Pro Tip: We recommend that you pull everything out of the box and lay it out. We have grouped the drawn components below with the hardware you’ll need for those Do not discard the hardware bags or mix parts from different bags.
-
Page 4: Choosing The Right Installation Location
1886 Choosing the Right Installation Location You probably bought this fan with a location in mind. Let’s check below to make sure it is a good fit. Check the room dimensions: Check the outlet box: 30 inches You must be able to secure the fan to building from blade tip to structure or fan-rated... -
Page 5: Installing The Ceiling Bracket
Installing the Ceiling Bracket You have two options for installation. Pick which one works best for your location. Remove any existing bracket prior to installation. Only use the provided Hunter ceiling bracket that came in your fan’s box. Hunter Pro Tip:... -
Page 6: Hanging The Fan
Follow below if you are using the downrod that came pre-assembled in your box. Need to install a longer or shorter downrod? Check out the guide at the end of this manual. Hunter Pro Tip: The ground wire attached to the downrod is approximately 8 inches. -
Page 7: Wiring The Fan
WARNING WARNING Hunter Pro Tip: Here is how to connect the wires: All wiring must be in accordance with The ceiling fan must be grounded. If the Push the bare metal ends of the wires together and slide a wire... -
Page 8: Installing The Canopy
1886 Installing the Canopy Insert the two canopy screws found in the hardware bag. Canopy Screw Lift the canopy into place so that the screw holes are aligned. Installing the Blades: Insert the blade into the blade slot around the center screw. - Page 9 1886 Assembling the Light 2 of 3 Light Kit Screw Feed the 9-pin plug connector coming from the bottom of the motor housing Partially install two light kit screws, through the center hole in the light kit found in the hardware bag, through assembly.
- Page 10 1886 Preparing the Wall Control Turning off the power KEY PRESS FUNCTION Ensure the power is OFF at the outlet box and wall switch location before proceeding LIGHT FUNCTIONS with installation. Light On/Off Light Dimming Control Long Light High Press Installing the battery Long Battery...
-
Page 11: Troubleshooting
• Turn the power off, support the fan carefully, and check that the hanger ball is properly seated. Hunter Pro Tip: Cleaning the Fan Use soft brushes or cloths to prevent scratching. Cleaning products may damage the finishes. -
Page 12: Limited Lifetime Warranty
Hunter instructions, accidental damage caused by the fan owner or related parties, Please do not ship your fan or any fan parts to Hunter. Delivery will be refused. modifications to the fan, improper or incorrectly performed maintenance or repair,...
Need help?
Do you have a question about the Oceana and is the answer not in the manual?
Questions and answers