Checking The Tire Pressure; Checking The Skids And Scraper; Checking The Operation Of The Traction Drive - Toro Power Max 1028 Operator's Manual

7

Checking the Tire Pressure

No Parts Required
Procedure
8
Checking the Skids and
Scraper
No Parts Required
Procedure
Refer to Checking and Adjusting the Skids and
Scraper (page 21).
9
Checking the Operation of
the Traction Drive
No Parts Required
Procedure
CAUTION
If the traction drive is not properly adjusted,
the machine may move in the direction
opposite of what you intended, causing injury
and/or property damage.
Carefully check the traction drive and adjust it
properly, if necessary.
1. Start the engine; refer to
(page 13).
2. Move the speed selector to Position R1; refer to
Operating the Speed Selector (page
3. Squeeze the left (traction) lever to the handgrip
(Figure 14).
9
g252396
Starting the Engine
16).