JOBOBIKE COMMUTER User Manual page 8

7. Clench the brake handle to slow down or stop the bike.
8. Switch the shifter by"+ "and"-"button to adjust the speed for
fitting with di erent road conditions.
-
+
9. Install the battery.
Put the battery into the battery base and push it until lock clicks.
Note:Please take good care of your keys.
10. Remove the battery.
Turn the key clockwise to unlock the battery and then lift the
battery up from the battery base.
Note:Please take good care of your keys.
13
11. Charge the battery.
(11.1) Open the anti-dust cover and plug the charger into the
Battery socket.
(11.2) The red light on the charger will turn on when charging.
(11.3) The red light will turn to green when the charging is
completed.
Charge port
Battery Charge
12. Press the button and you will see the battery power Indicator
4 lights: High power
3 lights: Middle power
2 lights: Low power
1 light: Must charge
13. Adjust the saddle height.
(13.1) Move the saddle up
or down to your desired
height,screw the handle to
make it tight or loose,
then fold the saddle quick
release to make the saddle
post fixed tightly.
Tighten
Loose
14
Press hard