Remove the finger printer broad in the direction shown by arrow
Push forward the LED board
Detach ODD switch board connector
the direction shown by arrow
Step
Screw (quantity)
4
M2.5 × 4mm, flat-head, nylon-coated (2)
1100 System board
Important notices for handling the system board
When handling the system board, read the following:
• Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or
composite.
64
Hardware Maintenance Manual
11
and remove it in the direction shown by arrow
14
, remove two screws
16
(E51).
10
.
12
(E41).
15
, and then remove the ODD switch board in
Color
silver
Torque
3.0 +/- 0.3kgf-cm