Table of Contents
Advertisement
Removal steps of the memory module
Release the two latches on both edges of the socket at the same time in the direction shown by arrows
and then unplug the DIMM in the direction shown by arrow
When installing:
Insert the notched end of the memory module into the memory slot. Press the memory module in firmly,
and pivot it downward until it snaps into place. Ensure that the memory module is firmly installed in the
slot and does not move easily.
1080 Upper case
For access, remove these FRUs in order:
•
"1010 External battery pack" on page 50
•
"1020 Keyboard" on page 50
•
"1030 Optical disk drive" on page 52
•
"1040 Base cover assembly" on page 54
•
"1050 Hard disk drive or solid-state hybrid drive" on page 56
•
"1060 Wireless-LAN /Bluetooth card" on page 57
2
.
a
b
Chapter 10
a
.
Removing or replacing a FRU
1
,
59
Advertisement
Table of Contents
