Canon CP300 User Manual page 141

[Alignment]
If you set the set length to "Specify, " you can change the alignment. The
default setting for alignment is set to "Centered. "
For print image, refer to
[Character Size]
Sets the character size. The default setting is "3 mm Norm. "
When printing from the MK Desktop Utility, the character size cannot be
set to "1.3 mm Norm. "
[Character Space]
Sets the space between characters. The default setting is "Narrow. "
[Lines]
Sets the number of lines. The default setting is "1 Line. "
[Continuous]
If you want to set up repeat printing for a page, enter the number of times.
The value can be set in the range of 1 to 200 (times).
NOTE
• When the set length is specifi ed, the settings for character size, frame, and character
space may not be able to be changed.
• When the print media is a label, if the set length is "less than 8.0 mm", "Rule confi guration"
(Centered) is applied and the setting cannot be changed.
6
Click [OK].
When you click [OK], the format setting
are confi rmed, and the settings are
refl ected in the preview area.
NOTE
• The settings for [Continuous] (continuous print) are not refl ected in the display of the
preview area.
"Specify the Cut Length and Alignment (P.56)"
137
.