Chapter 7: Trouble Shootings; What Can I Do When I Have Some Trouble At The First Time - SMC Networks SMCWAPS-G User Manual

C h a p t e r 7 :
C h a p t e r 7 :
C h a p t e r 7 :

What can I do when I have some trouble at the first time?

1. How do I make the client to connect to SMCWAPS-G?
A: Please prepare for one RJ45 cable and connect the LAN port directly.
SMCWAPS-G already supports MDI/MDIX.
2. How to "Reset settings to default"?
A: Press the buttons of "Shutdown" and "Backup" simultaneously over 6
seconds to reset the system to the factory default setting.
3. When I login the storage of SMCWAPS-G via My Network Places, but I
can not find any files of folders even if I have plugged HDD in
SMCWAPS-G.
A:
First, check your HDD status LED. If the hard disk is correctly connected,
the HDD status LED will flash. If the LED didn't flash, maybe you forget to
format the new hard disk before using it, or maybe the hard disk is not
connected correctly, or maybe the hard disk is corrupted.
Note.
This SMCWAPS-G supports FAT/FAT32/Ext2 file systems. If the
format of HDD is NTFS, the device just can read files and can not copy
any files to any NTFS folders.
4. No matter what I do, I can not configure SMCWAPS-G even if I setup
fixed IP and can search or Ping to SMCWAPS-G.
A: Please check the WLAN LED or HDD LED. If normal, they will be flash.
Otherwise, reset the settings to factory default and try it again.
T r o u b l e S h
T r o u b l e S h
T r o u b l e S h
83
o o t i n g s
o o t i n g s
o o t i n g s