Wireless Connection - SMC Networks SMCWAPS-G User Manual

should be found. Check the IP address, Subnet Mask, and Default Gateway
addresses are same as previous settings. If same, you are successful to
setup the network configuration.

2.2.3 Wireless Connection

Follow the steps below to connect to the SMCWAPS-G in a wireless
environment. We assume that there is at least one WLAN card installed on
your computer, and SMCWAPS-G is powered on.
Step 1: Enabling the WLAN card first, and check the Wireless Network
Connection properties from My Network Places.
Step 2: Select the Wireless Networks icon after entering the "Wireless
20