Fujitsu MAT3300FC Product/Maintenance Manual page 11

Important Alert Messages
The important alert messages in this manual are as follows:
Task
Mounting Installation
C141-E213
Important Alert Items
A hazardous situation could result in minor or moderate personal injury if the
user does not perform the procedure correctly. Also, damage to the product
or other property, may occur if the user does not perform the procedure
correctly.
Data loss
The drive adopts Reed-Solomon code for ECC. The sector-data is
divided into 3 interleaving sectors, and ECC is performed in each
sector where the maximum number of errors (up to 9 byte) can be
corrected. [Total maximum byte: 9 byte
If the error of read sector keeps allowable error byte number,
correction is performed.
However, if error byte exceeds its allowable number, correction
may not be performed properly.
Damage
Seals on the DE prevent the DE inside from the particle. Do not
damage or peel off labels.
Hot temperature
To prevent injury, do not handle the drive until after the device has
cooled sufficiently after turning off the power. The DE and LSI
become hot during operation and remain hot immediately after
turning off the power.
Alert message
×
3 ( interleave) = 27 byte]
Page
2-5
4-3
5-1
v