Using The Windows Wizard; Procedure - SMC Networks EZ Networking SMC2621W-P User Manual

Chapter 3 Wireless Print Server Configuration
Configuration Methods
The following methods are available to perform the required Print
Server configuration:
•
Windows-based Wizard - see below for details.
•
BiAdmin management utility program - see Chapter 8
for details.
•
Web-based setup - see Chapter 6 for details.
Advanced Configuration and Management
The BiAdmin management utility is provided for advanced
configuration and management. This program is installed by
default when the [Administrator] install option is chosen. See
Chapter 5 for details on using BiAdmin.

Using the Windows Wizard

The Windows-based Wizard is supplied on the CD-ROM, and runs
on Windows 95, 98, NT4.0, ME, Windows 2000 and Windows XP.
Using this Wizard is the recommended method to configure the
Print Server.
It can be used to configure the Wireless Print Server for your
Network environment, even if the Print Server does not have
a valid IP address.

Procedure

1. Insert the supplied CD-ROM into your drive. If the setup
program does not start automatically, run SETUP.exe in
the root folder.
12