Appletalk (Macintosh) - SMC Networks EZ Networking SMC2621W-P User Manual

AppleTalk (Macintosh)

Problem No. 1 Why do I get an incorrect printout?
Solution No. 1
Problem No. 2 Can't find the Wireless Print Server's name
Solution No. 2
Problem No. 3 My document didn't print to the right printer.
Solution No. 3
Some possible reasons are:
•
You may have chosen Binary encoding to print
the file. Try to use ASCII encoding.
•
Some of the fonts, which are in your print file
may not be supported by the printer. Try selecting
LaserWriter 7 instead of LaserWriter 8.
in the Chooser.
Try the following:
Make sure that AppleTalk is on (the button
1.
next to Active is highlighted in the Chooser).
Make sure the printer has been on and in the
2.
READY state for a few minutes.
Make sure the printer has not been renamed
3.
since its last appearance in the Chooser.
If the printer resides on a network with multiple
4.
zones, make sure the correct zone is selected
from the [AppleTalk Zones] box in the Chooser.
Check the following:
•
Another Wireless Print Server with the same name
may have received your print job. Use the PSTOOL
to reconfigure your Wireless Print Server name and
ensure all Wireless Print Servers have unique
names.
•
Make sure your application output encode is set
to ASCII. If not, change it to ASCII.
AppleTalk (Macintosh)
97