Windows Server Configuration; Windows Nt4.0 Server; Adding Tcp/Ip Printing Support; Adding A Tcp/Ip Remote Printer - SMC Networks EZ Networking SMC2621W-P User Manual

Windows NT4.0 Server

If using Windows Windows NT 4.0, Microsoft TCP/IP Printing
Support must be installed.
•
If it is already installed, add a TCP/IP Remote Printer,
as described below.
•
Otherwise, install TCP/IP printing support, then add
a TCP/IP Remote Printer.

Adding TCP/IP Printing Support

1. Go to [Start-Settings-Control Panel-Network].
2. Click the [Service] option and ensure that Microsoft TCP/IP
Printing is enabled. If it is not enabled, select the [Add] option
and enable it as usual.
3. If you added services in step 2, reboot the computer for the
changes to take effect.

Adding a TCP/IP Remote Printer

1. Go to [Start-Settings-Printer] and invoke the Add Printer
Wizard.
2. When prompted [with This printer will be managed by],
select [My Computer] and click [Next].
3. Select [Add Port...], then select [LPR Port] and click
[New Port].
W
INDOWS
C
ONFIGURATION
A
PPENDIX
S
B
ERVER
111