Using The New Port - SMC Networks EZ Networking SMC2621W-P User Manual

Your Internet
E-mail address
Retry Interval
(Seconds)
Reply
Notification
E-Mail
5. On completion, a new printer port will have been created.

Using the new Port

The Windows Control Panel is used to connect the correct printer
to the InterNet Printing Port. In Windows 95/NT, the procedure is:
1. Select the Printer which matches the remote printer, then
choose [Properties], as shown in the example below.
The normal address that people use to send
you E-mail.
If unable to connect to the E-Mail server, retry
after this time period (1 to 255 seconds, 30 is
usually OK).
Check to receive an E-Mail when your print
job has been processed.
Figure 39. InterNet Printer Properties
Internet Mail Printing
91