Print Server Configuration; Overview; Using The Windows Wizard - SMC Networks 2622W-P User Manual

Chapter 3: Print Server Configuration

Overview

The Print Server is designed to support many different platforms,
and the configuration required would depend upon the
environment in which it is installed.
• The Print Server usually requires configuration. A Windows-based
setup Wizard is provided on the CD-ROM to simplify this task.
• PCs wishing to use the printer attached to the Print Server
always require configuration. See chapter "Client Configuration"
for details.
• If you wish to use a queue-based printing system using
Windows NT Server/Windows 2000, the Network Server must be
configured as detailed in Appendix C - Network Server
Configuration. However, it is not necessary to use a Network
Server-based queue; client PCs can print directly to the Print
Server using the Peer-to-peer Print Driver installed by the User
setup option on the CD-ROM.
NOTE: SMC2622W-P and SMC2622W-U models support Windows,
Linux, Unix and Macintosh environments only.

Using the Windows Wizard

The Windows-based Wizard runs on Windows 95, 98, NT4.0, ME,
Windows 2000 and XP.
It will configure the Print Server for your Network environment.
Procedure
1. Insert the supplied CD-ROM into your drive. If the setup
program does not start automatically, run SETUP in the root
folder.
2. Run the Setup Wizard, either by using this option on the first
installation screen, or by selecting it from the menu after
running the Installation option.
10