Advertisement
Available languages
Available languages
If the correct printer type is not listed:
1. Click [Add New Printer] to run the Windows Add Printer wizard.
2. Step through the Wizard and install the required printer on the
default printer port.
3. After installation, the printer will be listed in the [Configure
Printer Port] screen above. Select it and click [Connect].
Note:
If using the Epson Spooler Manager, this program must be disabled,
as follows:
1. Run the Epson Spooler Manager.
2. Select [Queue Setup] from the menu.
3. Click [Use Print Manager] for this port.
4. Click [OK] to exit.
11
Macintosh (Apple Talk)
No Print Server configuration is required if using AppleTalk.
Just configure your Mac as follows:
1. Click the [Apple] icon and then [Control Panel-AppleTalk].
2. Ensure that [Ethernet] is selected under [AppleTalk Connection].
3. Click [Chooser]. The Chooser panel will open.
4. Click on either the [LaserWriter 8] icon (recommended) or the
[LaserWriter 7] icon.
5. Choose a PostScript printer from the list.
6. Click [Create] and it will search the PPD automatically.
7. Select a printer description from the list.
8. Click [Select]. Configuration is now complete.
Macintosh OS X - LPR Printing
If using LPR printing, you need to ensure the Print Server has
a valid IP address before configuring your Mac as follows.
1. Select the [Printer List] icon.
2. Click the [Add Printer] button.
3. Choose [LPR Printers Using IP].
4. Enter the [Printer's Address] and the [Queue Name]
(L1 for Port 1 or L2 for Port 2).
5. Select the [Printer Model] from the drop-down list.
6. Click [Add]. Configuration is now complete.
12
Advertisement
