Swivelling The Cordless Led Working Light; Magnetic Holder; Belt Clip; Tripod Thread - Parkside 391286 2201 Translation Of The Original Instructions

Swivelling the cordless LED working light

The cordless LED working light can be swivelled/adjusted into 8 positions.
Swivel the cordless LED working light 1 by clicking it into one of the 8
♦
positions.

Magnetic holder

NOTE!
■ Bear in mind that sliding the appliance may scratch the magnetic
surface!
You can use the magnets 6 to fix the appliance onto magnetic surfaces.

Belt clip

You can use the belt clip 6 to attach the appliance to a belt or similar.

Tripod thread

You can use the 1/4" internal thread 8 to screw the appliance onto
a tripod (not included).

Maintenance and cleaning

WARNING! RISK OF INJURY!
Always switch the appliance off and remove the battery
before carrying out any work on the appliance.
■ The appliance is maintenance-free.
■ Remove all dirt from the appliance. Use a soft, dry cloth for this purpose.
■ Do not allow any liquids to get into the appliance.
PLLA 12 B2 GB │ IE │ 13 ■