Advertisement
you will see a screen similar to the one below.
When Remote Control is enabled, you can
only manage and switch off the machine
and follow status on the washing machine.
All functions except child lock can be
managed through the application.
You can check the function indicator on
the key to follow whether the Remote
Control function is On or Off.
If the Remote Control function is Off,
all the operations are handled on the
washing machine and only status follow-
up is allowed on the application.
If the Remote Control function cannot be
enabled, you will hear a warning after pressing
the button. This might occur if the product
is switched on or if there is no product
paired through Bluetooth. Bluetooth setting
being Off or the washing machine's door
being open are examples for such cases.
When you enable this function on the washing
machine, said function will remain on except
for certain cases, allowing you to control your
washing machine remotely via Bluetooth.
In certain cases, it deactivates
itself for safety reasons:
• When your washing machine
undergoes a power interruption.
• When the programme knob is turned
to select a different programme or
when the product is switched off.
38 / EN
5.21.4 Troubleshooting
Follow the steps below if you are having
problem with controlling or connection.
Observe whether the problem persists or not
after the action you have performed. Do the
following if the problem is not resolved.
• Check whether your smart device is
connected to the relevant home network.
• Restart the product application.
• Turn Bluetooth off and on through
the user control panel.
• If the connection cannot be established
with the above processes, repeat the initial
set-up settings on the washing machine.
If the problem persists, consult an
Authorised Service Agent.
Washer-Dryer / User's Manual
Advertisement
