Advertisement
C
INFORMATION
• If you cannot complete the setup
successfully in 5 minutes, the washing
machine will switch off automatically. In this
case, you will have to start over the setup
procedure. If the problem persists, please
contact the Authorised Service Agent.
• You can use your washing machine with
more than one smart device. To do this,
download the HomeWhiz app on the other
smart device as well. After launching the
app, you will need to sign in to your account
you have previously created and paired with
your washing machine. Otherwise, please
read "Setting up a washing machine that
is connected to someone else's account".
A
WARNING!
• For HomeWhiz setup, your smart device must
be connected to internet. Otherwise, the
HomeWhiz App will not let you complete the
setup process successfully. If you are having
problems with your internet connection,
please contact your internet service provider.
C
INFORMATION
• The HomeWhiz application may ask you
to enter the product number stated on
the label of the product. Product label is
found on the inner side of the product door.
Product number is written on this label.
5.21.2 Setting up a washing
machine that is connected to
someone else's account
If the washing machine you want to use has
previously been registered in the system
with someone else's account, you need
to establish a new connection between
the HomeWhiz App and the product.
• Download the HomeWhiz App on the
new smart device you want to use.
• Create a new account and log in to this
account on the HomeWhiz app.
37 / EN
• Follow the steps in the HomeWhiz
Setup (5.21.1 HomeWhiz Setup)
to complete the setup.
A
WARNING!
• Since the HomeWhiz and Remote Control
functions of your product work through
pairing via Bluetooth, the product can be
run by only one HomeWhiz app at a time.
5.21.3 Using the Remote
Control function
After HomeWhiz setup, Bluetooth will turn on
automatically. To enable or disable the Bluetooth
connection, please see 5.11.2 Bluetooth 3".
If you switch your machine off and on
while Bluetooth is enabled, it will reconnect
automatically. If the paired device goes out
of the range, the Bluetooth connection will
turn off automatically. For this reason, you
will need to turn on Bluetooth again if you
want to use the Remote Control function.
You can check the Bluetooth symbol on
the display to follow the connection status.
If the symbol is on, this means that the
Bluetooth connection is established. If
the symbol is established, the product is
trying to connect. If the symbol is off, this
means that you have no connection.
A
WARNING!
• If the Bluetooth connection is enabled on your
product, you can select the Remote Control
function. If the Remote Control function
cannot be selected, check the connection
status. If the connection fails, repeat the
initial set-up settings on the appliance.
• For safety reasons, the product's door
will remain locked while the Remote
Control function is enabled, independently
of the operating mode. If you want to
open the door of the product, you will
need to turn the programme selection
knob or press the Remote Control key to
disable the Remote Control function.
If you want to control your washing machine
remotely, enable the Remote Control function
by pressing the Remote Control button while
the programme knob is in the Programme
Download/Remote Control position on the
control panel. Once the product is accessed,
Washer-Dryer / User's Manual
Advertisement
