Advertisement
• Anti Crease+
If you press and hold the spin selection button
for 3 seconds, this function will be selected and
the programme follow-up light of the relevant
programme will turn on. When this function is
selected, it aerates the laundry for up to 8 hours
at the end of the programme to prevent creasing.
You can cancel the programme and take your
laundry out at any time during the 8-hour
duration. Press the function selection key or the
machine on/off key to cancel the function. The
programme follow-up light will remain on until
the function is cancelled or the step is complete.
If the function cannot be cancelled, it will be
active in the subsequent washing cycles as well.
• Steam
You can press and hold the auxiliary function
key 2 for 3 seconds to select this function.
Use this programme to reduce the
wrinkles and shorten the ironing times
for a small amount of cotton, synthetic
or mixed clothes that are not stained.
• Child Lock
You can use the Child Lock to prevent children
from tampering with the machine. Thus you can
avoid any changes in a running programme.
C
INFORMATION
• When the Child Lock is enabled, you
can press the On/Off key to switch the
machine on or off. Programme resumes
when you start the machine again.
• You will hear a warning if the buttons are
pressed while Child Lock is enabled. This
audible warning will be cancelled if the
buttons are pressed five times consecutively.
To enable Child Lock:
Press and hold the Drying Level
Adjustment button for 3 seconds. When
the countdown "3-2-1" on the display
ends, child lock icon will be displayed. Once
you see this warning, you can release the
Drying Level Adjustment button.
To disable Child Lock:
Press and hold the Drying Level
Adjustment button for 3 seconds. When
the countdown "3-2-1" on the display
ends, child lock icon will disappear.
32 / EN
• Bluetooth
You can use the Bluetooth connection function
to pair your machine with your smart device.
This way, you can use your smart device to get
information about your machine and control it.
To enable Bluetooth:
Press and hold the Remote Control
function button for 3 seconds. You will
see the countdown "3-2-1", and bluetooth
symbol will be displayed. Release the Remote
Control function button. The Bluetooth
icon will flash while the product is being paired
with the smart device. If the connection is
successful, the light of the icon will remain on.
To disable Bluetooth:
Press and hold the Remote Control
function button for 3 seconds. You
will see the countdown "3-2-1", and
bluetooth symbol will be disappear.
C
INFORMATION
• You must complete the first setup of
the HomeWhiz app for Bluetooth to be
enabled. After the setup, if you press the
Remote Control function button while the
button is in the Programme Download/
Remote Control position, the Bluetooth
connection will be enabled automatically.
5.12 Drying steps
5.12.1 Iron Dry
Drying continues until the drying
level reaches the Iron Dry step.
5.12.2 Cupboard Dry
Drying continues until the drying level
reaches the Cupboard Dry step.
-
-
-
-
Washer-Dryer / User's Manual
Advertisement
