Link-Integrity Ping-Detect; Link-Integrity Ping-Host - SMC Networks EliteConnect SMC2555W-AG2 User Manual

7
Command Line Interface

link-integrity ping-detect

This command enables link integrity detection. Use the no form to disable link
integrity detection.
Syntax
[no] link-integrity ping-detect
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• When link integrity is enabled, the IP address of a host device in the wired
network must be specified.
• The access point periodically sends an ICMP echo request (Ping) packet to
the link host IP address. When the number of failed responses (either the
host does not respond or is unreachable) exceeds the limit set by the
link-integrity ping-fail-retry command, the link is determined as lost.
Example
Enterprise AP(config)#link-integrity ping-detect
Enterprise AP(config)#

link-integrity ping-host

This command configures the link host name or IP address. Use the no form to
remove the host setting.
Syntax
link-integrity ping-host <host_name | ip_address>
no link-integrity ping-host
• host_name - Alias of the host.
• ip_address - IP address of the host.
Default Setting
None
Command Mode
Global Configuration
Example
Enterprise AP(config)#link-integrity ping-host 192.168.1.10
Enterprise AP(config)#
7-128