Ip Telnet-Server Enable; Ip Http Port - SMC Networks EliteConnect SMC2555W-AG2 User Manual

ip telnet-server enable

This command enables the Telnet server. Use the no form to disable the server.
Syntax
ip telnet-server enable
no ip telnet-server
Default Setting
Interface enabled
Command Mode
Interface Configuration (Ethernet)
Example
Enterprise AP(if-ethernet)#ip telnet-server enable
Enterprise AP(if-ethernet)#

ip http port

This command specifies the TCP port number used by the web browser interface.
Use the no form to use the default port.
Syntax
ip http port <port-number>
no ip http port
port-number - The TCP port to be used by the browser interface.
(Range: 1024-65535)
Default Setting
80
Command Mode
Global Configuration
Example
Enterprise AP(config)#ip http port 769
Enterprise AP(config)#
Related Commands
ip http server (7-19)
System Management Commands
7
7-17