Ip Http Secure-Port - SMC Networks TigerSwitch SMC6128L2 Management Manual

ip http secure-port

This command specifies the UDP port number used for HTTPS/SSL
connection to the switch's web interface. Use the no form to restore the
default port.
Syntax
ip http secure-port port_number
no ip http secure-port
port_number – The UDP port used for HTTPS/SSL.
(Range: 1-65535)
Default Setting
443
Command Mode
Global Configuration
Command Usage
• You cannot configure the HTTP and HTTPS servers to use the same
port.
• If you change the HTTPS port number, clients attempting to connect
to the HTTPS server must specify the port number in the URL, in this
format: https://device:port_number
Example
Console(config)#ip http secure-port 1000
Console(config)#
Related Commands
ip http secure-server (4-41)
S M
YSTEM ANAGEMENT
C
OMMANDS
4-43