Table 4-15 Secure Shell Commands - SMC Networks TigerSwitch SMC6128L2 Management Manual

C L
OMMAND INE
Note: The switch supports both SSH Version 1.5 and 2.0.
Command
ip ssh server
ip ssh timeout
ip ssh
authentication-retries
ip ssh server-key size Sets the SSH server key size
copy tftp public-key Copies the user's public key from a TFTP
delete public-key
ip ssh crypto
host-key generate
ip ssh crypto zeroize Clear the host key from RAM
ip ssh save host-key
disconnect
show ip ssh
show ssh
show public-key
show users
The SSH server on this switch supports both password and public key
authentication. If password authentication is specified by the SSH client,
then the password can be authenticated either locally or via a RADIUS or
TACACS+ remote authentication server, as specified by the
authentication login command on page 4-92. If public key
authentication is specified by the client, then you must configure
authentication keys on both the client and the switch as described in the
4-46
I
NTERFACE

Table 4-15 Secure Shell Commands

Function
Enables the SSH server on the switch
Specifies the authentication timeout for the
SSH server
Specifies the number of retries allowed by a
client
server to the switch
Deletes the public key for the specified user PE
Generates the host key
Saves the host key from RAM to flash
memory
Terminates a line connection
Displays the status of the SSH server and
the configured values for authentication
timeout and retries
Displays the status of current SSH sessions PE
Shows the public key for the specified user
or for the host
Shows SSH users, including privilege level
and public key type
Mode Page
GC 4-48
GC 4-49
GC 4-50
GC 4-51
PE 4-84
4-51
PE 4-52
PE 4-53
PE 4-53
PE 4-24
PE 4-54
4-54
PE 4-56
PE 4-81