Ip Igmp Snooping Vlan Static - SMC Networks TigerSwitch SMC6128L2 Management Manual

ip igmp snooping vlan static

This command adds a port to a multicast group. Use the no form to
remove the port.
Syntax
[no] ip igmp snooping vlan vlan-id static ip-address interface
• vlan-id - VLAN ID (Range: 1-4093)
• ip-address - IP address for multicast group
• interface
- ethernet unit/port
- port-channel channel-id (Range: 1-8)
Default Setting
None
Command Mode
Global Configuration
Example
The following shows how to statically configure a multicast group on a
port.
Console(config)#ip igmp snooping vlan 1 static 224.0.0.12
ethernet 1/5
Console(config)#
- unit - Stack unit. (Always unit 1)
- port - Port number. (Range: 1-28)
M F
ULTICAST ILTERING
C
OMMANDS
4-231