Cables - SMC Networks TigerSwitch SMC6709FL2 Installation Manual

C
ABLES
For 100BASE-TX/10BASE-T connections, a twisted-pair cable must have
two pairs of wires. Each wire pair is identified by two different colors. For
example, one wire might be red and the other, red with white stripes. Also,
an RJ-45 connector must be attached to both ends of the cable.
Caution: Each wire pair must be attached to the RJ-45 connectors in a
Figure B-1 illustrates how the pins on the RJ-45 connector are numbered.
Be sure to hold the connectors in the same orientation when attaching the
wires to the pins.
B-2
specific orientation. (See "Cabling Guidelines" on page 4-2 for
an explanation.)
Figure B-1. RJ-45 Connector Pin Numbers
8
8
1
1