Replacing the display panel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Connect the display cable to the display-panel connector on the display panel.
2
Close the latch, and adhere the tape that secures the display cable to the display
back-cover and antenna assembly.
3
Place the display panel gently on the display back-cover and antenna assembly.
4
Align the screw holes on the display panel with the screw holes on the display
back-cover and antenna assembly.
5
Replace the four screws (M2x3) that secure the display panel to the display
back-cover and antenna assembly.
Post-requisites
1
Replace the
display
2
Replace the
display
3
Replace the
wireless
4
Replace the
base
5
Replace the keyboard.
6
Replace the
optical
7
Replace the battery.
70
computer. After working inside your computer, follow
After working inside your
bezel.
assembly.
card.
cover.
drive.
computer. For more safety best
www.dell.com/
Before