Fastening Machine For Transporting; Unloading - Hitachi Zaxis 345USLC-6N Operator's Manual

Fastening Machine for Transporting

d
WARNING: Fasten the machine frame to the deck
securely with chains and cables. While traveling, loads
may shake around, move forward or backward or to
the sides.
1. Place cog stoppers or blocks in front of and behind the
tracks to help secure the machine.
2. Fasten each corner of the machine and front attachment
to the trailer with appropriate strength of chains or
cables.

Unloading

d
WARNING: At the point where the ramp meets the
level surface there is a sudden change of angle. Take
care when traveling over it.
IMPORTANT: Make sure that the angle of the boom and
the arm is kept between 90 to 110 ° when unloading
the machine.
Damage to the machine is possible if the arm is kept in
a suspended state during unloading.
1. Travel extremely slowly with the bucket on the ground
and the angle of the arm and the boom kept at between
90 to 110 ° when moving from the edge of the trailer
onto the ramp.
IMPORTANT: When driving the machine over the ramp,
do not allow the machine to hit the ground with
the arm too hard. Possible damage to the hydraulic
cylinders may result.
TRANSPORTING
6-5
M1V1-06-001
M107-06-014