Side View Camera System (Optional) - Hitachi Zaxis 345USLC-6N Operator's Manual

Side View Camera System (Optional)

Images from side cameras (right side of machine) (4) and side
cameras (left side) (5) can be displayed on the side camera
monitor (1) inside the cab.
d
WARNING:
 Check visibility before operating the machine.
When visibility is poor, the field of vision cannot be
ensured, which may lead to damage and/or serious
injury.
 Do not make any alterations, such as changing the
position of side cameras (right side of machine) (4) or
side camera (left side) (5).
 If the quality of the image on side camera monitor (1)
is poor, clean the camera(s) and/or monitor to make
the image clearer. Always ensure good footing when
cleaning the cameras.
 If it is difficult to see side camera monitor (1), adjust
the angle of the monitor and/or the position of the
seat so it is easy to see. (Refer to the sections on
adjusting the side camera monitor position and
adjusting the seat.)
f
NOTE: The surface of side camera monitor (1) and camera
lenses are made of plastic. When cleaning them, use a clean,
water-dampened cloth and wipe lightly. Never use an organic
solvent.
IMPORTANT:
 The images displayed on side camera monitor (1)
are only meant as aids. People and objects displayed
on the monitor may appear differently from their
actual positions or distances. Before moving the
machine, always check the area around the machine
thoroughly before moving it.
 When the door of the cab is fully open, the door
appears in the image from side camera (5) (left side).
If the field of vision is insufficient, ensure visibility
using the operator seat mirror.
 If there are any problems with the image in side
camera monitor (1), contact your nearest authorized
dealer.
OPERATOR'S STATION
4
5
1-120
1
MDC1-01-561
MDD5-01-002
MDD5-01-003