Renault KANGOO Vehicle User Manual page 61

DIGITAL KEY
(3/4)
Starting, stopping the engine
Upon first use and each time a new
smartphone is used, it is necessary to
calibrate your digital key with your ve-
hicle.
To do this, activate Bluetooth® on your
smartphone then follow the procedure
from the manufacturer's application.
When calibrating, the smartphone must
be placed in the 1 placement area.
To start/stop the engine, the system
checks that the smartphone is present
in the 1 placement area before allowing
the engine to be started.
For more information, please refer to
the information on "Starting, stopping
the engine" ➥ 2.2 ➥ 2.3.
The smartphone must remain in the ve-
hicle throughout the journey.
1
It is necessary to place the smart-
phone in the placement area in
order to start and stop the engine
and when calibrating.
If the smartphone is no longer in the
passenger compartment when you try
to switch the engine off, a message
is displayed on the instrument panel:
press and hold the engine start/stop
button for more than two seconds 2.
If the smartphone is no longer in the
passenger compartment, make sure
you can retrieve it before pressing and
holding. Without a smartphone or card,
you will not be able to start the vehicle
again.
2
1.47