Renault KANGOO Vehicle User Manual page 427

BONNET
(2/2)
Closing the bonnet
Before closing the bonnet, make sure
that nothing has been left in the engine
compartment.
To close it again, hold the bonnet in the
middle and lower it to 25 cm above the
closed position, then release it. Ensure
that the bonnet is properly closed.
If it does not lock itself under its own
weight, gently push it until it fully locks.
Ensure that the bonnet is
properly locked.
Check that nothing is pre-
venting the catch from lock-
ing (gravel, cloth, etc.).
In the event of even a slight
impact involving the radi-
ator grille or bonnet, have
the bonnet lock checked by
an approved dealer as soon as pos-
sible.
The vehicle drive system
in an electric vehicle uses
a direct voltage of approxi-
mately "400 V".
This system can get hot during
and after switching off the ignition.
Respect warning messages given
on the labels in the vehicle.
Any intervention or modification
on the vehicle's "400 V" electrical
system (components, cables, con-
nectors, traction battery) is strictly
prohibited.
Risk of serious injury and/or elec-
tric shock which may endanger
life.
The engine cooling fan may also
start at any moment. The
label in the engine compartment re-
minds you of this.
Risk of injury.

4.3